Best Blowers Company in india.

  • Location

    Mundka Industrial Area, Mundka, New Delhi- 110041

  • Mon - Sat: 9:30am to 6:30pm

    Sunday Holiday

Direct Drive Fans/Blowers
Direct Drive Fans/Blowers manufacturers

Direct drive fans are the most simple. The motor directly connects to the fan wheel – either the wheel is mounted on the motor shaft or is directly coupled with the motor shaft. Fan arrangements that use or allow a direct drive have some important benefits.

Heating, ventilation, and air conditioning system with a direct drive blower is when the blower motor is connected directly to the fan. As the motor operates and turns the shaft, the fan moves accordingly. An HVAC system with a belt drive fan is slightly different.

Low Pressure Fan
Low Pressure Fan

Unlike the high pressure blower, the high volume low pressure blower fan does not pressurize or sustain a given pressure within a closed or sealed environment. These blowers are designed to pull in or push out large volumes of air which are rated in CFM's or cubic feet per minute.

Pressure blowers are a type of centrifugal fan. A pressure blower is designed so that the air is drawn through the air inlet, forced through the fan housing, and is discharged at 90 degrees from the inlet

Enquiry Now

Medium Pressure Fan
Medium Pressure Fan

Unlike the high pressure blower , the high volume Medium pressure blower fan does not pressurize or sustain a given pressure within a closed or sealed environment. These blowers are designed to pull in or push out large volumes of air which are rated in CFM's or cubic feet per minute.

Pressure blowers are a type of centrifugal fan. A pressure blower is designed so that the air is drawn through the air inlet, forced through the fan housing, and is discharged at 90 degrees from the inlet

Enquiry Now

High Pressure Fan
High Pressure Fan

High-pressure blower fans are a type of centrifugal fan usually used in demanding industrial applications. Depending upon the level of pressure or vacuum required, single-stage pressure blowers, multi-stage pressure blowers, and exhausters, and positive displacement packages are available.

A fan increases the static pressure on it's outlet and can also decrease the static pressure on the inlet slightly. Even though very slight in comparrison, a fan is technically a compressor. The static pressure rise is usually in the order of inches of water.

Enquiry Now

SISW Blower
SISW Blower

Single Inlet Single Width Fan: These Blowers are used where application of the Blower is to produce either high volume at low pressure in the working medium or moderate volume at an adequate pressure.

SISW Fan. Single Inlet Single Width Fan: These Blowers are used where application of the Blower is to produce either high volume at low pressure in the working medium or moderate volume at an adequate pressure.

Enquiry Now

DIDW Blower
DIDW Blower

DIDW Centrifugal Fans are double the width of a conventional fan, they are essentially 2 fan sets back to back with the adjoining case wall removed. This has the advantage of a smaller overall footprint and only one motor is required.

The BC-DW Centrifugal Fan is designed to handle large volumes of relatively clean air as required in heating, ventilating, and air conditioning systems as well as many industrial air supply and exhaust applications.

Enquiry Now

Induced Draft Fan
Induced Draft Fan

An induced draught fan (ID fan) is provided to maintain a negative pressure in the furnace by sucking the products of combustion from it with a slight positive pressure at the discharge end vis-à-vis the bottom of the chimney/stack.

Induced Draft Fans or ID Fans removes flue gases from the combustion chambers and creates a vacuum of negative air pressure with a blower to suck the air out of the combustion chamber. These air or flue gases are discharged from the boiler through a stack or chimney.

Enquiry Now

Forced Draft Fan
Forced Draft Fan

Fans that are used to pressurize a space or create mechanical air pressure in a system are referred to as forced draft fans. Occasionally, manufacturing spaces are required by specifications to be maintained at a specific positive pressure.

Forced-draft fans focus the pressure and volume at the outlet of the fan to push air through a system, creating positive air pressure. Industrial induced draft fans operate by focusing the pressure and volume at the inlet of the fan to pull air through a system.

Enquiry Now


All Products
Call Us
Whatsapp